One Bucket List Item Accomplished - a Bendpak Lift in My Garage!

Yep, my very own Bendpak lift!

And here is the final result!

Yeah, yeah, I need to clean up but for now...

So this is a BendPak HD-9 model, designed for vehicles up to 9000 lbs (or 4082kg).  Interestingly, the Japanese importer worked with Bendpak to make the usual precision improvements, including replacement of failure-prone rubber O-rings with those of a superior design.

Install took only one day - the crew arrived at a bit before 1000 and got to work immediately.

I found out later why a crane was needed

I appreciated how they took time to measure several times to ensure proper placement of the GT-R. This is going to be a tight fit!

I like how they wanted to get as close to the outer wall as possible.

A few moments later they had moved their tools inside and laid out a thin blue sheet to prevent scratches.

Massive! No way I could have done this with a friend. And later, I appreciated their experience (they say they do about 200 of these in Japan per year, mostly businesses though).

So here is what I was talking about - this technician is replacing the brass hydraulic fittings with ones improved with better O-rings, as otherwise the OEM ones tend to leak relatively easily.

Brass out, plastic in - but it's what is on the inside that counts!

As you can see, they stored their tools behind the garage, making for a quicker and more efficient install.

Getting the crane ready to haul those really heavy platforms that support the car.

And once in, they still kept measuring.

Finally, they tested this going up and down. But then asked if they could test with the GT-R on it, before bolting it down.

That main reason was to lift up to the max allowed height with the GT-R on, and make sure the Bendpak was sufficiently centered so that the car is centered into the cut-out in the roof.

Finally, it was time to bolt down into the concrete using these guys

These replace the OEMs, and yes they are made in Japan.

Two guys to drill. One guy drilling, the other one with the industrial vacuum to catch all the concrete dust.

And finally... amazing how large the GT-R looks. Also amazing how scratched up the car is on the bottom - before I made sure that the more visible areas were pristine, but now I am seeing all sorts of scratches on the lip and side skirts.  Sounds like more projects for me!!

Thankfully the IS-F fits.  If it hadn't, I was prepared to grind away some of the concrete floor to create extra breathing space between the car roof and the bottom of the Bendpak tray.

So... what next!  I don't think I will ever be done with the GT-R...

Nice End of Year Present! Thank You Very Much!

 So I was pleasantly surprised to receive this today. Fairly light but it WAS from Trust Kikaku...

Wow! Somethiing from HKS! Wait, it says Door Mat?

And it came with instructions! Says that HKS are not responsible for any mods made to this product!

As you can see here, it is much thicker than the cheapo Ikea carpets I have been using. And a non-slip backing too!

Looks fantastic!

And yes, the electric heater is so my legs stay warm while I tinker...

So to my friends who sent this to me - thank you very much! A very nice way to finish off 2022, let us hope that 2023 is a better year, I am sure it will likely be!

Mods to the Garage - LED Lighting for the Win!

 So even though this blog is about my R33 GT-R, for me ownership of this car means I have a responsibility to make sure this car looks good all the time.  That means keeping it clean, and that means that when I'm not driving it or making mods to it, I want to do what I can to keep it clean.

Up until now, most of my detailing work has been the result of trial and error, and by no means is the result perfect, but I recently decided that as I am lucky enough to have a decent sized garage, why not create an environment that would allow me to go full blow OCD when polishing my car?

You may have seen glimpses of my garage in this blog, or on Speedhunters here in detailing Dino's yellow 911 and here doing some interior work on the same car, but I always felt like while a good working space what we could do was limited by the amount of light - sunlight for paintwork and interior lighting for everything else.

So after doing some research, I found a set of 20 LED lamps with a claimed output of 2300 lumens each with 5000K coloring.

Yep, made in China but the price was right. Quality not bad actually!

I think there is more cardboard here than the LEDs themselves

And yeah came with a whole bunch of connectors and clips

Of course having ordered 20, the first thing I did was to try to figure out the best lay out for the garage. I did this by laying out all the cardboard tubes the LEDs came in on the garage floor to visualize spacing, as well as how to hook up the wiring between each LED lamp (they are modular so voltage goes in one side and out the other, into the next one, etc.)

The GT-R was freshly back from the R's Meeting

Did a quick detail, and made sure the LEDs worked properly. Yes!

But before installing on the ceiling, I took the easy way out, and installed 5 units alongside the far wall next to the Lexus.

All lights in the garage off, trying these 2 LED lights.

Installation was easy, so I went ahead and wired in 5 of them along this wall, using the mortar space between two tiles as my guide. I initially thought about horizontal placement but then realized it might be better to have the vertical length in order to see into the paint well, from all angles. So I went ahead and ordered several 1 meter long extension cords to run between each light.

The blue paint looks fantastic!!

Photo glare! Sorrry about that... but you can see how bright the LEDs are and the extension cords I have running between at least one pair (which I cleaned up later)

So while this looks provides plenty of light, I had 15 more LED lamp units to install on the ceiling.  I then realized that I would need some help in order to ensure that I drilled the holes for the clips in a straight line.  So went ahead and got this laser level:

Which let me generate some cool green lasers on the ceiling:

(After I drilled the hole)

Once I had one north-south and one east-west installed, then it was relatively easy to keep things straight.

Just the standard garage lamps

Overhead standard lamps and side LEDs

Standard overhead plus overhead LEDs!

All Lights On! (except of course the spotlights over the GT-R)

But remember, even though I was making good progress I still have 5 more LED lamp units left. So I proceeded to install this set up:

Which made things MUCH brighter, but I felt like I could do better. More LEDs in the center, plus create another equal rectangle on the left side.  Which means 5 more LED units....

And so I decided that I would move the five 5000K LED lamp units that I had on the garage wall, and replace with five more newly purchased LED lamps - but this time with 6500K color, which is slightly more bluish than the 5000K - by having two different colors, the thinking is that this will give me better ability to spot fine scratches on lighter colored cars like the GT-R, at least from the side.

This is a well known brand, I've seen YouTubers install these.

Nicely packaged, yes.

But despite using the same couplers and cables, the form factor is thinner (Barrina on right) 

Can you spot the difference in color?

Two on the left are 6500K, three on right are 5000K

And as for the ceiling, I was able to quickly do this with the 5 I took from the wall:

But sharp eyed readers will notice a few things

Given the very tight squeeze of the center lamps, I had to get clever, so broke out my new soldering iron and accessories.

Adjustable soldering iron from Hakko - Japan's leading manufacturer of soldering irons!

It was then that I realized I had run out of cable to power up the center bulbs, so even though I fashioned some out shortened connectors with flat cables (so as to be able to fit between the ceiling and lamps, instead of bending the cables at impossible angles over such lamps), I had to order some more connectors and cords to properly hook up the center lamps (the manufacturer recommends a maximum of 8 lamps on one circuit, so I have each of the large rectangles - at 6 lamps each - on a circuit, and will have the center 4 on their own dedicated circuit).

gotta say, even at this stage looks awesome!

A few days later:

3 circuits - left, right, and center lamps plus of course the separate circuit for the wall mounted lamps

So let's just say that I am SUPER excited by how bright the garage is now.  And with all this light, the next step is to invest in some really good stuff in terms of car detailing.  I have a Porter Cable orbital buffer, and just got some more new pads, but now the research shall begin on polishes and sealants.  Something for me to do over the winter...