Anyway, a while ago I had purchased a steam cleaner for home use (Google "Vapamore" - that's it!). It was good for the initial clean up of our new (rental) house, but afterwards, I found myself not using it all. Then of course, the lightbulb – use it for my car!
Where would I use it? Certainly would not be the places I polish, but probably areas like the wheelwells, and the under chassis area, maybe the engine. But I had to buy jack stands first.
My first experience with jackstands, I ended up buying super stable ones – but they were too tall for frequent use. As readers to this blog will recall, with such a low car, I have to drive up on ramps first, THEN jack up the car. So the ideal height is high enough that I can work on the car (ie take the wheels off, etc.) but not so high that the jack is at its limit.
Anyway, once I bought these low jackstands, I was in business.
When I decided a few weeks ago to switch back to the StarSpecs from the track tires, during the switchover I used the steam cleaner to clean the wheel wells.
The dirtiest, for some reason, was the right rear. Here are some pictures.
Before:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjau7SFr4eIuTo8LVUQyYFQvSuUkD6dkuNGyx3F08Xl92ml5UWkkyH6yFTExfpxcZr4wS62uQZ7t2n6TUsj4E7SI8RX7h2Hq2pBTJvYcB4lCdOK20c1rjcyQbL3mJ6gN6o9nJG1XCiJcYan/s640/beforecleanrightrearplastic2.jpg)
After:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiFoRJdx60l0YMqFsPHcOo4UB60siKjloQ_REgSDRxklA7XKB60uF1L79kXb30qT02Up1kDUQcsw51FRBoSpnbR6e6M50ww_fZNCcLvHw04aNYgtDQsLs2KCbTBqFbKlyWw-OlYY67KXTeD/s640/aftercleanrightrearplastic1.jpg)
Before:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiEfFqdFd18EgfGjsBElkXP_e6ouCiAjYZP32gfr7CG5weHHvJxuviD-24KRTzb9qCMss9GTEcnppAu6fF2Jvuh0DsibF7AHdPSylUSsGE8g2KPyDefWwIjHyoOYsn8ZBFgRCp2azKdP2Pl/s640/beforecleanrightrear.jpg)
After:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgEIW3pLQPGWRicASNWAkaDc5L5_pZRKLkJnlZMkw-dLlGoj8rDwTvgvaUhA3MiWmrOmHvlgq8JBqlkXh2n_ZyB_AZ90NGVXrnat99EpH3TCBNpOEb-n9552ARmrchXdajiEj_FmwRbDjeL/s640/aftercleanrightrera.jpg)
The difference is huge!
The technique is not simply to apply the steam. Often, I have to get things going by spraying on some Simple Green before steaming, but in any case, the steam loosens the dirt, and I can simply wipe off.
Next, I plan to steam clean the underside...stay tuned...